midea WHS-199B Compact Single Door Kegerator Beer/Beverage Refrigerator, 4.9 Cubic Feet

Manufacturer: Matrix Productions Inc Brand: wallthat Model: 19588KEGFRIMEDUSK

Installation Instructions: Required Tools: Sharp Utility Knife. Our refrigerator skins are made so that one size fits most medium size dorm and keg fridges. This means the skins are slightly larger then most medium size dorm and keg fridges and will require trimming to fit. This refrigerator skin wrap measures 28 3/4in x 41in. Please measure your fridge door to make sure this skin will cover not only the face of the door but wrap around the sides as well. WallThatTM self adhering vinyl skins wrap. Our skins are a composite of layered commercial grade vinyls. The bottom layer is a soft, flexible vinyl with a special removable adhesive that is easily positioned, applied without air bubbles, and effortlessly removed without leaving a sticky residue. WallThat skins are printed with the latest in UV protected inks that resist fading for up to 3 years even in direct sunlight. Finally we bond a professional grade laminate over the entire skin adding a professional glossy protective finish.

Manufacturer: Matrix Productions Inc Brand: wallthat Model: 19539KEGFRIMEDUSK

Installation Instructions: Required Tools: Sharp Utility Knife. Our refrigerator skins are made so that one size fits most medium size dorm and keg fridges. This means the skins are slightly larger then most medium size dorm and keg fridges and will require trimming to fit. This refrigerator skin wrap measures 28 3/4in x 41in. Please measure your fridge door to make sure this skin will cover not only the face of the door but wrap around the sides as well. WallThatTM self adhering vinyl skins wrap. Our skins are a composite of layered commercial grade vinyls. The bottom layer is a soft, flexible vinyl with a special removable adhesive that is easily positioned, applied without air bubbles, and effortlessly removed without leaving a sticky residue. WallThat skins are printed with the latest in UV protected inks that resist fading for up to 3 years even in direct sunlight. Finally we bond a professional grade laminate over the entire skin adding a professional glossy protective finish.

Brand: EdgeStar Model: KC2000SSHBKG

An excellent value for those that brew their own beer and those that like to get kegs filled at breweries and brewpubs, the Edgestar Ultra Low Temp Home Brew Stainless Steel Kegerator with Keg (KC2000SSHBKG)gives you the power to serve handcrafted brew on tap in your own home. This full size beer refrigerator is capable of holding a standard full size 1/2-barrel keg and is also designed for easy set up, making it perfect for seasoned kegerator pros as well as those who are unfamiliar with home draft beer systems. Ideal for in-home settings, this versatile kegerator can be used in your home bar, kitchen, game room or anywhere else that you like to entertain. Able to Tap Commercial and Ball-Lock Kegs: This kit includes everything you need to tap a commercial keg or the included ball-lock keg What's Included: Ships complete with all components needed to tap a commercial or Cornelius/ball lock keg: 5 lb. CO2 cylinder, regulator, one (1) standard "D" coupler, one (1) home brew conversion kit, tower, beer line, gas line, drip tray, faucet, tap handle and one (1) empty reconditioned ball lock Cornelius keg (CK1-CL1). Ultra Low Temperature: EdgeStar full size kegerators are capable of reaching temperatures in the low 30s making them the coldest kegerators out of any on the market. Integrated Casters: The heavy-duty casters attach easily to allow for easy movement External CO2 Tank Moun...

Manufacturer: Matrix Productions Inc Brand: wallthat Model: 20040KEGFRIMEDUSK

Installation Instructions: Required Tools: Sharp Utility Knife. Our refrigerator skins are made so that one size fits most medium size dorm and keg fridges. This means the skins are slightly larger then most medium size dorm and keg fridges and will require trimming to fit. This refrigerator skin wrap measures 28 3/4in x 41in. Please measure your fridge door to make sure this skin will cover not only the face of the door but wrap around the sides as well. WallThatTM self adhering vinyl skins wrap. Our skins are a composite of layered commercial grade vinyls. The bottom layer is a soft, flexible vinyl with a special removable adhesive that is easily positioned, applied without air bubbles, and effortlessly removed without leaving a sticky residue. WallThat skins are printed with the latest in UV protected inks that resist fading for up to 3 years even in direct sunlight. Finally we bond a professional grade laminate over the entire skin adding a professional glossy protective finish.

Manufacturer: Matrix Productions Inc Brand: wallthat Model: 27058KEGFRIMEDUSK

Installation Instructions: Required Tools: Sharp Utility Knife. Our refrigerator skins are made so that one size fits most medium size dorm and keg fridges. This means the skins are slightly larger then most medium size dorm and keg fridges and will require trimming to fit. This refrigerator skin wrap measures 28 3/4in x 41in. Please measure your fridge door to make sure this skin will cover not only the face of the door but wrap around the sides as well. WallThatTM self adhering vinyl skins wrap. Our skins are a composite of layered commercial grade vinyls. The bottom layer is a soft, flexible vinyl with a special removable adhesive that is easily positioned, applied without air bubbles, and effortlessly removed without leaving a sticky residue. WallThat skins are printed with the latest in UV protected inks that resist fading for up to 3 years even in direct sunlight. Finally we bond a professional grade laminate over the entire skin adding a professional glossy protective finish.

Manufacturer: TapRite Brand: Taprite Model: DK30CPSS02 Color: Multi

The TapRite Kegerator Tower Conversion Kit for Dual Tap Configuration (DK30CPSS02) includes: One (1) 3" Stainless Steel Draft Beer Tower - Dual Faucet One (1) Single Gauge CO2 Regulator Two (2) "D" Sankey Couplers One (1) Plastic T for 5/16" I.D. Hose Four (4) Plastic Snap Clamps for 5/16" I.D. Hose One (1) Faucet Wrench

Manufacturer: Vinotemp Brand: Vinotemp

VT- Beer Kit This kit contains everything you need to dispense pressurized and non-pressurized kegs with a mini keg beer dispenser. Features: -Includes: Regulator, (3) CO^2 Cylinders, CO^2 connector, CO^2 holder, CO^2 stand, dispensing unit, cleaning bottle, CO^2 pressure relief valve, and an orange keg seal.-Adaptor support stand.-Primary Material: Plastic -Primary Material Details: ..-Pieces Included: Regulator, (3) CO^2 Cylinders, CO^2 connector, CO^2 holder, CO^2 stand, Dispensing unit, Cleaning bottle, CO^2 pressure relief valve, Orange keg seal.-Number of Taps: Dual tap.-Leveling Legs Included: No.-CO2 Bottle Included: No -CO2 Bottle Capacity: ..-Adjustable Temperature Control: No -Thermostat Type: .-Minimum Temperature: .-Maximum Temperature: ..-Compatible Keg Size: Mini keg.-Undercounter Compatible: No.-Commercial Use: Yes.-Outdoor Use: No.-Recycled Content: No -Remanufactured/Refurbished: ..-Eco-Friendly: No.-Country of Manufacture: United States.Assembly: -Installation Required: Yes -Tools Needed for Installation: No tools necessary..

Manufacturer: Matrix Productions Inc Brand: wallthat Model: 19546KEGFRIMEDUSK

Installation Instructions: Required Tools: Sharp Utility Knife. Our refrigerator skins are made so that one size fits most medium size dorm and keg fridges. This means the skins are slightly larger then most medium size dorm and keg fridges and will require trimming to fit. This refrigerator skin wrap measures 28 3/4in x 41in. Please measure your fridge door to make sure this skin will cover not only the face of the door but wrap around the sides as well. WallThatTM self adhering vinyl skins wrap. Our skins are a composite of layered commercial grade vinyls. The bottom layer is a soft, flexible vinyl with a special removable adhesive that is easily positioned, applied without air bubbles, and effortlessly removed without leaving a sticky residue. WallThat skins are printed with the latest in UV protected inks that resist fading for up to 3 years even in direct sunlight. Finally we bond a professional grade laminate over the entire skin adding a professional glossy protective finish.

Manufacturer: MSS Brand: MSS

The all stainless 1/4" MFL (Male Flare Thread) to 3/8" Barb piece is useful for connecting tubing with female flared fittings (barbed swivel nuts) to 3/8" tubing.