WhisperKOOL Hot Side Ducting Kit 2000i/3000i/4000i #7424

Manufacturer: Unbranded Brand: Badgerpipe

19x20/152,000 BTUs / 100 PSI For use in your hot air furnace plenum. Other sizes available. ***Not recommended for air compressors*** This listing does not include the install kit. Information about our heat exchangersThis heat exchanger is ideal for a 19 x 21 plenum or larger. The outlets come out on the 19 side (shown as the vertical side in the picture above) The fin area is 19 x 20 There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer.All exchangers are 3 1/2 thick.Aluminum fins are installed at 12 fines per inch.All exchangers are triple pass design.Tubing is 1/4 copper.All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite's.Exchangers from us come with a lifetime warranty, including shipping. Exchangers will work with chilled water also.We stock many sizes, always order the largest size that will fit into your plenum.Any questions or concerns call us at 800-571-7002 See our other listings if you wish to purchase the install kit.Installation brackets for installing water to air heat exchangers inside of furnace plenums. This easy to install kit takes all of the work out of installing a coil. Great for the do it your...

Manufacturer: Unbranded Brand: Badgerpipe

Our Private Labeled 3 speed pumps are an excellent product at a Great Price!!! The 34 GPM Badger Circulating Pump With Cord offers: * Removable Check Valve * Rotor Bleed Screw * 3 Speed ( Low, Med, High ) * Ceramic Shaft * 2 year warranty *Flow range: 0-34 U. S. GPM *Head range: 0-30Feet * 1 Cast Flange Kit Gallons/MinuteLow:20-24Medium:24-28High:30-34 These pumps are UL listed. Approved for North American installations. Operation Conditions * Ambient temperature: Max. 104°F (40 ) * Liquid temperature: 36°F (2 ) ~ 230°F (110 ) * System pressure: Max. 145 psi. Installation * The main parts of the pump include: pump body, impeller, stator, rotor, shielded sets, and vent plug. * The pump does not use mechanical seal stator and rotor are sealed with stainless steel. The overall pump structure is sealed with two heat-resistant rubber gaskets to avoid leakage. * The pump bearing is lubricated and cooled by the pumped water. ** Pump shaft must be installed horizontally.* Interchanges with Grundfos 26-96, Taco 011, Wilo Star 30, Wasser GPD10 and others. If you have any questions please call 888-591-0943. If you choose to pay by credit card or v-check you can call that number as well. Buy from a US manufacturer.Shipping of larger items are freight truck. Smaller items are shipped UPS or Speedee. If your purchase is for insulated pipe, be sure we receive a phone number for the f...

Manufacturer: Kalamera Brand: Kalamera Model: KRC-50SZF-2 Color: Black

Brand Name: Kalamera Model Info: KRC-50SZF Product Weight: 82.67lbs Product Dimensions(HxWxD):33.07*19.29*22.83 inches Shipping Weight: 89.28lbs Package size(HxWxD): 34.96*22.04*25.39 inches Capacity: 120L/4.24 cubic_feet Form Factor: Free standing Color: Black Voltage: 120 volts Defrost: No frost with interior fan circulating Door Material Type: Full glass door Lighting: LED Shelf Type: Wooden shelf Shelves: 7 Material Type: Metal

Manufacturer: Unbranded Brand: Badgerpipe

This listing is for one roll of 1000' of 1 NSF Certified Non Oxygen Barrier PEX Tubing For Heating and Plumbing.NSF Certified PEX tubing is made to the following specifications. Made to ASTM specifications. Rated at 100 psi at 180 degrees. Rated at 80 psi at 200 degrees. Rated at 160 psi at 73 degrees. Made using the silane method (water bath). PEX Size Inside Diameter Outside Diameter Volume Gal/100 ft 3/8" .360 .500 .50 1/2" .485 .625 .92 3/4 .681 .875 1.83 1" .875 1.125 3.03 NSF Certified Pex tubing is connected in 2 different ways. Crimp fittings are the most effective way of connecting. This is done with a barbed fitting and a copper crimp ring. The ring is compressed with the use of a crimp ring tool. This method is the cheapest and best way to a connection and is the least susceptible to leaks down the road. You can also use push-fit fittings. They are great for a quick repair, or a small installation project. They are however more expensive and more susceptible to leaks down the road. Do Not use pex tubing for any of the following applications. Anywhere the temperature could reach 230 F or more.Not for use with steam.Keep out of direct sunlight.Keep away from areas that are exposed to a flame or heat source.Not to be used with liquids -40 F or belowAny questions feel free to call us at 888-591-0943 or if you choose to pay with credit card or v-check you can call us at...

Brand: EdgeStar Color: Stainless-Steel

Full-range temperature control makes it easy to save energy or boost your settings for maximum freezing capabilities. An ideal use in a studio apartment or dorm room with its upright design.

Manufacturer: Haier Brand: Haier Model: HVTEC16DABS Color: Black

Keep both red and white wine at the perfect temperature and at the same time with this dual-zone, LED display wine cellar. The double pane insulated curved glass door is great to see through and monitor the temperature. The electronic controls with blue LED displays, independently adjust temperature 46°-66°F in the lower compartment for more precise cooling. Black cabinet and trim for a sleek look and has 6 full-width chrome storage racks for a total bottle capacity of 16 wine bottles. Recessed handle Soft interior light 6 full-width chrome storage racks Black cabinet with black door trim Ultra quiet thermoelectric cooling. Bottle Capacity: 16 Operational Features: Vibration-free Operation,Adjustable Temperature Control Control Type: Electronic Product Weight (lb.): 38.4 lb General Features: See-Thru Door,Interior Light Returnable: 90-Day Included Items: No Additional Items Included Storage Features: No Additional Features Minimum Temperature (F) 46

Manufacturer: Cuisinart Brand: Cuisinart Model: CRTCUICWC800RB

The Cuisinart Private Reserve Wine Cellar is the compact solution for wine storage! By maintaining the ideal storage temperature, the Cuisinart Private Reserve Wine Cellar ensures that up to eight bottles of wine preserve their signature bouquet, flavor and body. Use the electronic touchpad to set the preferred temperature (between 39 percent - 68 percent F) and the thermoelectric cooling system holds the temp, quietly and efficiently. An attractive stainless finish ensures any wine collection is displayed in style. Product Features: 8-bottle wine cellar Thermoelectric cooling system - reduces noise and vibration Electronic touchpad for precise temperature control with blue LED display Low energy consumption Soft interior lighting with on/off control 4 chrome contoured wine racks designed to hold 750ml bottles Double-pane viewing window Adjustable feet

Manufacturer: Unbranded Brand: Badgerpipe

20x25/ 200,000 BTUs / 100 PSI For use in your hot air furnace plenum.Other sizes available. ***Not recommended for air compressors*** This listing does not include the install kit. Information about our heat exchangersThis heat exchanger is ideal for a 20 x 26 plenum or larger. The outlets come out on the 20 side (shown as the vertical side in the picture above) The fin area is 20 x 25 There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer.All exchangers are 3 1/2 thick.Aluminum fins are installed at 12 fines per inch.All exchangers are triple pass design.Tubing is 1/4 copper.All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite's.Exchangers from us come with a lifetime warranty, including shipping. Exchangers will work with chilled water also.We stock many sizes, always order the largest size that will fit into your plenum.Any questions or concerns call us at 800-571-7002 See our other listings if you wish to purchase the install kit.Installation brackets for installing water to air heat exchangers inside of furnace plenums. This easy to install kit takes all of the work out of installing a coil. Great for the do it your...

Manufacturer: P&N TECHNOLOGY(XIAMEN)CO.,LTD. Brand: P&N Model: AA-24-12

P&N Industrial Peltier 24W 12V Mini TEC Cooler With IP55 Protection Specifications: Cooling Power Qmax (W): 24 Running Current (A): 2.4 Nominal Voltage (V): 12 Max Voltage (V): 15 Operation Temperature(℃):-10 to 50 Dimension L*W*H (mm): 100X183X121mm