Enjoy your favorite beers on draft with the EdgeStar Full Size Dual Tap Kegerator & Draft Beer Dispenser (KC2000TWIN). This beer dispenser represents excellent value by combining an inexpensive imported refrigerator with commercial-grade, NSF approved beer lines, allowing you to save money without skimping on the high-quality craftsmanship of the components. This beer fridge allows you to store up to a full sized half shell Sankey standard keg, with limited exceptions, and it does not support use of Coors, Miller rubberized or other oversized kegs. The double tap kegerator will also accept up to two standard sixth barrels, or two cornelius (homebrewed) kegs with an additional ball lock connector (sold separately). This UL-listed kegerator includes a 5 lb. brewer preferred, upgraded aluminum CO2 cylinder (supplied empty), and is one of the easiest kegerators to set up. With a modern black finish and chrome beer tower, this beer cooler will look great in your kitchen, garage, or even your game room. We strongly recommend purchasing a cleaning kit with this kegerator- beer equipment should be cleaned after every keg. Fully Kitted: Ships complete with all components needed to tap one keg or two sixth barrels Integrated Casters: The casters that ship with the unit allow for easy movement around the room or the house UL Listed: Approved by the most trusted source for product compliance in the world for use in commercial & residential applications. INTERNAL Dimensions: 28" H x 16 3/4" W x 15 1/2" D; External Dimensions: 48 1/2 x 20 1/10 x 24 13/16; weight 81.6 lbs.
Stores up to a full sized half shell Sankey standard keg or two sixth kegs; does NOT support use of Coors, Miller rubberized or other oversized kegs
Temperatures: Low 30s to mid 40s degrees; rolling casters included for easy mobility; Protective floor plate
For freestanding use only; 5 lb. CO2 cylinder (supplied empty) included with external or internal mounting capabilities
External Dimensions: 48 1/2 x 20 1/10 x 24 13/16 (height includes the draft tower); Warranty 90 days labor 1 year parts
For a stainless steel version please see model KC2000SSTWIN, for a single tap KC2000, single tap stainless KC2000SSA
Product Information Specifications for EdgeStar Full Size Dual Tap Kegerator & Draft Beer Dispenser - Black Below:
DHCK2-5T Features: -10" Stainless steel wall mountable drip tray will clean up the spill before it happens. -Ball lock keg couplers that connect to cornelius Pepsi kegs. Number of Taps: -Dual tap. Undercounter Compatible: -Yes. Commercial Use: -Yes.
COLDTOWER KEGERATOR TOWER COOLERS are the all around BEST tower coolers you can buy!!! They cool your beer tower, ELIMINATING EXCESS FOAM, and making even the first beer of the day ICE COLD. When you want your house or car as COLD as possible, what do you do??? BLAST the AC!!! Same idea with your beer tower!!! I have constructed and tested many different designs in my years of producing tower coolers, and have found the most important factor in cooling a beer tower is the rate of airflow into it. Our tower coolers are equipped with POWERFUL 34 CFM BLOWERS which BLAST COLD AIR into your beer tower!!! The combination of the blower being so powerful and the fact that it blows DIRECTLY into the air hose (as opposed to a computer box fan, like you will find on my competitor's products. They blow some air into the hose, but most of it is lost, blowing against the wall of the box) enables our units to cool a beer tower better than any other tower coolers on the market. During my tests, I found the 34 CFM blower resulted in tower temperatures 20-25Â° lower than when using a computer box fan. The end result??? COLDER BEER and LESS FOAM!!! The COLDTOWER is powered by a 12 VOLT, highly efficient power supply, and is equipped with a switch on the power cord, so you don't have to open the kegerator door to turn the unit on and off. The switch enables you to turn the unit off when you are ...
Installation Instructions: Required Tools: Sharp Utility Knife. Our refrigerator skins are made so that one size fits most medium size dorm and keg fridges. This means the skins are slightly larger then most medium size dorm and keg fridges and will require trimming to fit. This refrigerator skin wrap measures 28 3/4in x 41in. Please measure your fridge door to make sure this skin will cover not only the face of the door but wrap around the sides as well. WallThatTM self adhering vinyl skins wrap. Our skins are a composite of layered commercial grade vinyls. The bottom layer is a soft, flexible vinyl with a special removable adhesive that is easily positioned, applied without air bubbles, and effortlessly removed without leaving a sticky residue. WallThat skins are printed with the latest in UV protected inks that resist fading for up to 3 years even in direct sunlight. Finally we bond a professional grade laminate over the entire skin adding a professional glossy protective finish.
Kegco's KOM30S-1 Digital Kombucharator with Stainless Steel Door is a high quality keg dispenser that includes everything needed to dispense kombucha from ball lock cornelius Pepsi kegs. It has all the necessary equipment to pour a cold, healthy glass of kombucha and can also easily be converted into a regular refrigerator with it's two adjustable storage shelves. The stainless steel interior floor plate provides durability by displacing the weight of the keg evenly over the floor of the cabinet, allowing you to slide the kegs in and out smoothly. It's versatility makes it and excellent choice for anyone wanting kombucha on tap at home all the time while also providing the extra storage space of an extra refrigerator. It is quiet and energy efficient for use in the home. Easy roll casters make moving this unit from your bar to your patio a breeze and they lock to prevent the unit from rolling once you have it in position. It also has a recessed drip tray with a plastic grill that can easily be taken out and cleaned in the dishwasher, and an attractive chrome safety rail that helps to keep mugs and glasses from sliding off.
Use the EdgeStar Refrigerator for Kegerator Conversion (BR1000SS) to build and customize your own kegerator. This indoor, freestanding unit has the capacity to store one Cornelius keg or one sixth barrel, in addition to a loaded 2.5 lb CO2 tank inside. With a cooling range of 32 - 46Â°F, the digital thermostat makes adjusting your desired temperature quick and easy. This unit's reversible, stainless-steel door offers a distinguished appearance, while catering to multifunctional rooms for optimal placement and user convenience. Ready for conversion: The BR1000SS is specifically designed to support kegerator conversion; Use this refrigerator to build a custom kegerator or to replace only the refrigerator unit of your current kegerator. Integrated lock: The BR1000SS comes equipped with a built-in lock to help ensure that your craft brew kegs will always be protected and secure. Interior lighting: The unique blue LED interior lighting illuminates the kegerator and components, allowing you to make swift and easy changes. Adjustable thermostat: Keep the interior of your BR1000SS as cold as you desire with the integrated thermostat feature. Dimensions: 32.7" H x 17.5" W x 20.1" D *When empty, it is recommended that you keep the temperature between 35-38ÂºF.
CO2 Distributors are an economical way to run more than one keg off of a single CO2 tank. Each shutoff has its own ball check valve to prevent the flow of liquid into the regulator. This gas distributor is made out of aluminum and offers a one piece construction for easy mounting.