Work Sharp WS3000 Wood Tool Sharpener

The Work Sharp 3000 wood tool sharpener let's you monitor stock removal from above with the "see-through" wheel while a large port provides access from underneath. This works exceptionally well for sharpening large turning tools quickly and efficiently while also providing a means to sharpen and hone carving tools, especially the smaller profiles that require a more delicate touch. This is an air cooled, dry sharpening system that uses maintenance free 150mm tempered glass wheels to which you adhere PSA abrasives. Slotted "see-through" wheel allows for fast and precise sharpening of carving and lathe tools. The precise and repeatable sharpening port enables sharpening of 20, 25, 30, and 35 degree angle chisels and plane irons up to 2" wide. No jigs are needed; just select angle and sharpen. Lapping abrasive in the sharpening port increases burr removal and speeds sharpening. The rigid bevel angle settings and skew cam provide precise positioning of the sharpening port. Bevel and skew geometry are not affected by wheel diameter, chisel size, or complex user setup. Forced air-cooling and the sharpening port heat sink allow for higher material removal rates without affecting the steel temper. It allows for quick reshaping of a new or damaged chisel, and fast honing of a micro bevel. The precise bevel angles are set in the sharpening port, not in a fixture or jig, so switching between angles is simple and fast. No re-calibration is required for changing wheel diameter or tool size. Coarse grind for rapid shaping and then micro-fine hone all in one port. The Work Sharp 3000 comes with a 2 year manufacturer's warranty and the following accessories: 2 tempered float glass wheels, a "see-through" slotted wheel, top tool rest, crepe stick, and PSA abrasive kit. It has a 110V, 1/5 hp motor, 580 rpm (gear reduced), and weighs 16 lbs. The Work Sharp WS3000 Wood Tool Sharpener is an easy-to-use dry sharpening system for chisels, plane irons, lathe tools, carving tools, and other woodworking tools. Designed for the serious woodworker, this sharpening system is packed with unique features that make it easy to achieve consistent angles on flat blades and contoured tools.

The Work Sharp WS3000 Wood Tool Sharpener provides: A port for sharpening blades up to 2-inches A tool rest for sharpening larger blades on top of the wheel An edge-vision wheel for sharpening curved and specialty tools

Before and after shots show the way Work Sharp renews dull, rusty tools. View larger.

Tools with larger blades can be safely sharpened on top of the wheel. View larger.

Edge-Vision lets you look through the wheel and see the surface you are sharpening. View larger.

Everything you need is included. View larger.

Sharp Blades Mean Better Results
Sharp tools mean you can cut through tougher materials and create more precise details. They reduce the amount of strain work puts on your body and make you much less likely to damage your work surface or hurt yourself. But stopping to sharpen tools interrupts the flow of work, and with some systems it's quite difficult.

With the Work Sharp WS3000 Wood Tool Sharpener, you can sharpen blades quickly, consistently, and easily without making a mess or delaying a project.

Quick, Consistent Sharpening
Precision tools like small chisels are extra tricky to sharpen freehand on large, rough wheels. That's why the sharpening port on the WS3000 is so innovative. This port, which handles blades from 1/8 inch to 2 inches, makes it incredibly easy to sharpen the bevel on small tools from underneath the wheel.

Angles of 20, 25, 30, and 35 degrees are set in the machine, so you don't need an extra jig or a special tool to ensure that you are creating a bevel edge with a consistent, effective angle. You can also achieve a perfect five-degree micro-bevel for fast re-honing.

An adjustable fence in the port keeps the tool square during sharpening, and when you pull the tool back out of the port, a ceramic oxide lapping abrasive automatically removes the burr on the back of the tool for a clean finish and a sharp cutting edge.

Convenient Sharpening Options
When you are working with bigger tools, a conveniently placed tool rest makes it easy to hold larger blades in place as you sharpen them freehand on the top of the wheel. Also available is a wide blade attachment that enables you to sharpen and hone blades up to three inches wide with the Work Sharp 3000 (not included).

And when it comes time to sharpen contoured tools, you can slip an innovative slotted Edge-Vision wheel onto the WS3000. This lets you look through the wheel to see the edge of the tool you are sharpening from below, taking the guesswork out of maintaining lathe tools and other curved or v-shaped blades.

Durable Glass Wheels Provide Consistency
In addition to the Edge-Vision wheel, this sharpener comes with two tempered glass wheels. The big advantage of tempered glass is that it maintains its flatness and won't wear down like a traditional grinding wheel.

You can attach a wide variety of standard six-inch, adhesive-backed abrasive disks to these wheels, making it easy to select the grit you need for rough grinding or fine honing. And with two disks, you can always have four different grits ready to go (one on each wheel surface), making it easy to move from task to task.

Click to view more features of the WS3000.

Reliable, Mess-Free Dry Operation
In order to avoid the hassle and mess of expensive wet sharpening systems, this dry system uses routed airflow from the motor and a special heat-sink design to keep your tools from overheating. This means you don't have to worry about damaging the edge you just created or ruining the temper of steel tools.

To make all this possible, Work Sharp uses a quiet 1/5-HP motor that produces a high torque max wheel speed of 580 rpm. This low-rpm wheel maintains speed regardless of load for improved consistency, so whether your specialty is custom furniture, cabinetry, or old-fashioned wooden toys, you can rely on the WS3000 to keep your tools sharp and ready for use.

This award-winning Work Sharp tool is backed by a full two-year warranty.

What's in the Box
Wood tool sharpener, two glass wheels, one slotted Edge-Vision wheel, a crepe stick (for cleaning abrasives), an instructional DVD, and 16 abrasives: 11 solid abrasives and 5 slotted abrasives with grits ranging from P80 to 3600 Micro-Mesh