Kegco Homebrew Kegerator Single Faucet Ball Lock Keg Dispenser Black

Brand: Coldpour

The Coldpour Kegerator Tower Blower is the most cost effective way to eliminate foamy beer from a home kegerator! I am a professional draft beer technician. I install, service, and clean draft beer systems for a living. While working, the problem I see coming up time and time again in residential beer systems is a warm beer tower. When the beer inside the tower is allowed to get warm, all of the dissolved CO2 escapes from the beer as foam! This means that the first pour of the day is always a glass full of foam, and only after pouring a few beers does it finally start dispensing beer properly. This amount of waste is unacceptable in a commercial system, and it should be in your home too! When I started looking into a solution for this problem, I was extremely disappointed with what I found. All of the products were either too weak to properly cool a beer tower, or they were way overpriced. I decided there had to be a better system to cool a beer tower in a residential kegerator, and so the Coldpour was born! When designing the Coldpour, I extensively tested different types of fans and blowers, including those used by my competitors. In a commercial beer system, we always use squirrel-cage centrifugal type blowers as they deal with static pressure much better than an axial fan. I focused on this type of fan, and found a solution that is both powerful and very quiet. The Coldpour...

Manufacturer: Kegco Brand: Kegco Color: Stainless Steel

Bring the fun of a brewery tasting room into the comfort of your own home by dispensing your homebrew from Kegco's HBK209S-2 Dual Faucet Home-Brew Kegerator! Thanks to this kegerator's two-faucet design and large interior, you can easily dispense from up to two ball lock home brew kegs at a time while keeping a third perfectly cooled. When you share your home brew straight from the tap, your guests will get a richer tasting experience than they would from drinking out of a regular bottle, allowing them to observe your brew's hue and clarity, appreciate it's brewery-fresh taste and aroma, and enjoy the perfect temperature and effervescence. Kegco has included a specially designed two-product direct draw kit with this homebrew kegerator, so all you'll need to add is the CO2 gas and the kegs of beer. The complete kit comes with upgrades like a polished stainless steel two-faucet draft tower, CO2 cylinder with corrosion-resistant red coating, and premium double gauge regulator included at no additional charge, giving you an extra $37 worth of value. For ease of serving, the HBK209S-2 features a textured top surface and a guard rail that helps prevent your mugs and glasses from sliding off, as well as a dishwasher-safe drip tray that catches drips and spills and can be thrown into the dishwasher for hassle-free cleaning. The four locking casters make it easy to move this kegerator f...

Manufacturer: UBC Brand: UBC Color: Chrome

Dispense your beers in style using the UBC Triple Faucet MILANO Beer Tower (MLN3). This cobra style beer tower has a clean chrome finish and includes three (3) domestic faucets and three (3) beer lines. The tower is glycol cooled, so you can be sure your beer is kept cold from the keg to the glass. Please Note: Although pictured, tap handles are not included with this tower.

Manufacturer: Nostalgia Electrics Brand: Nostaglia Model: KRS2100

The Nostalgia Electrics KRS2100 Kegorator Beer Keg Fridge dispenses beer quickly and easily. It keeps a keg on tap and cold whenever you need it, making it a good choice for parties, cookouts and almost any get-together with family and friends. It works well for times when you are serving a crowd. Swivel casters make the Nostalgia Electrics Kegorator beer keg fridge in black mobile enough to move around the clubhouse, pool area or anywhere else that you want to get the party started. The included long-lasting C02 bottle is good for about four 15-gallon kegs. This beer dispenser features a semi-gloss tap tower with a spring-loaded top-mounted tapper to make pouring a breeze. A chrome guard rail and drip tray finishes the look of the durable counter and gives the Nostalgia Electrics KRS2100 Kegorator Beer Keg Fridge a sleek and modern look that works well in any setting. Nostalgia Electrics Kegorator Commercial Beer Keg Fridge, Black, KRS2100: Holds one full size 1/2 barrel keg, one 1/4 barrel pony size keg or two 5-gallon D system kegs Keg coupler fits D system valves and does not fit non-standard keg sizes Adjustable thermostat with interior temperature range of unit is 30-40° F Includes empty 2.5-pound CO2 bottle, double meter regulator and drip tray Spring loaded tap for easy pull and release dispensing Four casters provide easy portability Approved for commercial and hous...

Manufacturer: Matrix Productions Inc Brand: wallthat Model: 29094KEGFRIMEDUSK

Installation Instructions: Required Tools: Sharp Utility Knife. Our refrigerator skins are made so that one size fits most medium size dorm and keg fridges. This means the skins are slightly larger then most medium size dorm and keg fridges and will require trimming to fit. This refrigerator skin wrap measures 28 3/4in x 41in. Please measure your fridge door to make sure this skin will cover not only the face of the door but wrap around the sides as well. WallThatTM self adhering vinyl skins wrap. Our skins are a composite of layered commercial grade vinyls. The bottom layer is a soft, flexible vinyl with a special removable adhesive that is easily positioned, applied without air bubbles, and effortlessly removed without leaving a sticky residue. WallThat skins are printed with the latest in UV protected inks that resist fading for up to 3 years even in direct sunlight. Finally we bond a professional grade laminate over the entire skin adding a professional glossy protective finish.

Manufacturer: Sunpentown Brand: SPT Model: BD-0538 Color: Stainless Steel

This attractive countertop beer dispenser is perfect for home entertainment. Chills the beer within 19 to 21 hours and stores it at the optimum temperature of 32-39 degrees Fahrenheit. Equipped with CO2 cartridge pressure system, this mini kegerator can keep your beer fresh and chilled up to 30 days. Assembly required Specifications Capacity: 5L kegs Input voltage: 110-120V / 60Hz Input power: 65W / 1A Power cord length: 4 ft Noise level: ≤38dB(A); (ambient noise ≤25dB(A)) Temperature range : 36-53°F (2-12°C) Unit Dimension: 10.71W x 16.3D x 16.93H in. Package Dimension: 13 x 18 x 19 in. Unit weight: 13.89 lbs Gross weight: 19 lbs

Manufacturer: Tukzer Brand: Tukzer

Features：A perfect addition to your holiday partiesYou can add beer or juice or water or else.Novelty and cool dispenser will bring LIFE to the partyStyle: Dual GunSize:16cm x 16cm x 45cm,Capacity:450ml *2 DescriptionA perfect addition to your holiday parties. You can add beer or juice or water or else.Novelty and cool dispenser will bring LIFE to the party.

Manufacturer: Matrix Productions Inc Brand: wallthat Model: 19535KEGFRIMEDUSK

Installation Instructions: Required Tools: Sharp Utility Knife. Our refrigerator skins are made so that one size fits most medium size dorm and keg fridges. This means the skins are slightly larger then most medium size dorm and keg fridges and will require trimming to fit. This refrigerator skin wrap measures 28 3/4in x 41in. Please measure your fridge door to make sure this skin will cover not only the face of the door but wrap around the sides as well. WallThatTM self adhering vinyl skins wrap. Our skins are a composite of layered commercial grade vinyls. The bottom layer is a soft, flexible vinyl with a special removable adhesive that is easily positioned, applied without air bubbles, and effortlessly removed without leaving a sticky residue. WallThat skins are printed with the latest in UV protected inks that resist fading for up to 3 years even in direct sunlight. Finally we bond a professional grade laminate over the entire skin adding a professional glossy protective finish.

Manufacturer: UP100 Brand: UP100® Color: Black + White

Description   Type:Bar Accessories Material:Plastic Color:white/black   This Quick Disconnect Coupler is of a Ball Lock design that works with Cornlelius pepsi kegs.  This Ball Lock Liquid Fitting is threaded. You will need a barbed swivel nut(not include,available separately) to connect a hose to this disconnect.  This makes it easy to screw and unscrew your tubing from the fitting for cleaning. ,White or Light Gray ball lock is for gas in. Black ball lock is for beer out.       Package Contents 1 x Black Disconnect for liquid  1 x white Disconnect for gas