Perlick Beer Keg Shank Flange - Tarnish-Free Brass

Manufacturer: EdgeStar Brand: EdgeStar Model: TBC50-ACC

With the 5-Liter EdgeStar TBC50BL/TBC50S Mini Keg Beer Dispenser Accessory Kit you can tap any type of mini keg you want. Whether it be a Bavarian porter, an English stout, or even root beer and cream soda for the kids, this accessory kit allows you the freedom to perfectly pour draft beer from the 5-Liter EdgeStar Mini Keg Beer Dispenser and know that your beer will be protected and poured under the conditions that the brewer intended. The adapter ships with enough CO2 to tap 3 mini kegs and includes a keg tap, CO2 regulator with gauge, 3 mini CO2 cartridges, 2 re-usable seals and much more. Works with all standard 5-liter mini-kegs, so you can switch in root beer or cream soda for the kids anytime.

Manufacturer: Matrix Productions Inc Brand: wallthat Model: 26485KEGFRIMEDUSK

Installation Instructions: Required Tools: Sharp Utility Knife. Our refrigerator skins are made so that one size fits most medium size dorm and keg fridges. This means the skins are slightly larger then most medium size dorm and keg fridges and will require trimming to fit. This refrigerator skin wrap measures 28 3/4in x 41in. Please measure your fridge door to make sure this skin will cover not only the face of the door but wrap around the sides as well. WallThatTM self adhering vinyl skins wrap. Our skins are a composite of layered commercial grade vinyls. The bottom layer is a soft, flexible vinyl with a special removable adhesive that is easily positioned, applied without air bubbles, and effortlessly removed without leaving a sticky residue. WallThat skins are printed with the latest in UV protected inks that resist fading for up to 3 years even in direct sunlight. Finally we bond a professional grade laminate over the entire skin adding a professional glossy protective finish.

Manufacturer: MSS Brand: MSS

CO2 Distributors are an economical way to run more than one keg off of a single CO2 tank. Each shutoff has its own ball check valve to prevent the flow of liquid into the regulator. This gas distributor is made out of aluminum and offers a one piece construction for easy mounting.

Manufacturer: MSS Brand: MSS

These bolt-on leg extensions for the 27 Gallon Fermenator are a great feature for brewers that want to make both ales and lagers with the same unit. Since the legs are removable, you can place the Fermenator in you refrigerator for lager brewing. With the legs attached, the Fermenator is at the perfect height for easy siphoning into a Cornelius keg. The leg extensions may also be used with casters, which is quite handy for rolling the Fermenator into place after filling.

Manufacturer: MSS Brand: MSS

The Ball Check Valve screws into the regulator body or Wye adapters.It prevents liquid from backing up and entering the gas lines or regulator. The thread sizes for this valve are 1/4" NPT x 1/4" MFL.

Manufacturer: Avanti Brand: Avanti Model: CB350S-IS Color: Black/ Platinum Laminet finish on door

Avanti CB350S Portable Party Pub CB350S-IS Water & Beverage Dispensers

Manufacturer: MSS Brand: MSS

These bolt-on leg extensions for the 14.5 Gallon Fermenator are a great feature for brewers that want to make both ales and lagers with the same unit. Since the legs are removable, you can place the Fermenator in you refrigerator for lager brewing. With the legs attached, the Fermenator is at the perfect height for easy siphoning into a Cornelius keg. The leg extensions may also be used with casters, which is quite handy for rolling the Fermenator into place after filling.

Manufacturer: MSS Brand: MSS

CO2 Distributor's are an economical way to run more than one keg off of a single CO2 tank. Each shutoff has its own ball check valve to prevent the flow of liquid into the regulator. This gas distributor is made out of aluminum and offers a one piece construction for easy mounting.Note: Swivel Nuts are not included.

Manufacturer: NewAir Brand: NewAir Model: AK-200SS Color: Stainless Steel

AK-200SS Finish: Stainless Steel Features: -Includes CO2 Bottle. -Kegerator. -Taps: 1. -Temperature controls. Product Type: -Kegerator. Number of Taps: -Single tap. Compatible Keg Size: -Mini keg. Finish:Generic Specifications: -Voltage: 115 Volts. -Amps: 1.9 Amps. Dimensions: Overall Height - Top to Bottom: -33.13 Inches. Overall Width - Side to Side: -21.25 Inches. Overall Depth - Front to Back: -26.5 Inches. Overall Product Weight: -89 Pounds.