Homeleader K01-032 Personal Travel Blender with One Travel Lid, 13 x 13 x 38.5cm, White/Green

How to use the blender: Place the base on a flat level, stable surface. Ensure the product is unplugged from the electrical outlet. Fill the cup with the food that you wish to chop/blend. Screw the Flat Blade assembly or Cross Blade assembly clockwise onto the Cup until secure. Turn the Chopper Cup Assembly upside down so that the Blade assembly is on the bottom. Attach the assembled Chopper by aligning the three tabs on the outside of the Cup with the three notches on the top inner edge of the Base. Plug the product into a standard 120-volt AC electrical outlet. Press down on the Cup Assembly firmly and turn it counter-clockwise to lock into place. Press and hold the Power Pulse switch to operate. To prevent product overheating, limit continuous operation to five seconds at a time. The Cup Assembly MUST be locked in order to operate. To stop processing, simply let go of the Power switch. Wait until the Blades stop completely before removing the Cup Assembly by turning it clock-wise to unlock it from the Base. Unplug the product from the electrical outlet when it is not in use or is left unattended. Caution: The product is not intended for blending hot liquids. This product is not intended for blending frozen solid ingredients. It is recommended to chop ingredients into smaller portions before freezing, and then allow the ingredients to defrost slightly before mixing. Large frozen solid ingredients may damage the cups. Crushed Ice is recommended instead of solid ice cubes. For liquid ingredients, do not fill the containers to their maximum capacity. Overfilling the Cups could result in spillage, causing burns and/or property/product damage. A maximum of 3/4 of the capacity is recommended.