1 1/4"- 2" PEX crimp Tool

Manufacturer: TOOGOO(R) Brand: TOOGOO(R) Model: 037717

Specification:Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications from CPU coolersto alternate power sources, or even for your own custom car drink warmer/cooler.Since they consist primarily of semiconductor material sandwiched between ceramic plates and have no moving partsThese devices must be used in conjunction with a heat sink to avoid burnedEach device is full inspected and testedFitted with 6-inch insulated leadsInstallationCooling piece is very simple to install and use.Before installation, to find a dry cell, connected to the two leads of the cooler,obviously cold you can feel at one end and the other end of fever, remember that the polarityof the lead and determine a good cooler cold and hot end. If you want to get a bigger system Ling,it is recommended that two cooling mode, with two stack up with the above, a grim absorption following a fever,the experiments prove two refrigeration effect is much better than the single-stage, the condition can choose three, of course, have a large power supply support.Package included:100% Brand New10 x TEC1-12706 Thermoelectric Cooler

Manufacturer: Unbranded Brand: Badgerpipe

18X22 / 158,400 BTUs / 100 PSI For use in your hot air furnace plenum. Other sizes available. ***Not recommended for air compressors***This listing includes the install kit.Information about our heat exchangersThis heat exchanger is ideal for a 18 x23 plenum or larger.The outlets come out on the 18 side (shown as the vertical side in the picture above) The fin area is 18 x22 There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer.All exchangers are 3 1/2 thick.Aluminum fins are installed at 12 fines per inch.All exchangers are triple pass design.Tubing is 1/4 copper.All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite's.Exchangers from us come with a lifetime warranty, including shipping. Exchangers will work with chilled water also.We stock many sizes, always order the largest size that will fit into your plenum.Any questions or concerns call us at 800-571-7002This also includes the installation kit shown in the pictures above. Installation brackets for installing water to air heat exchangers inside of furnace plenums. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer...

Manufacturer: Unbranded Brand: Badgerpipe

24x24 / 230,400BTUs / 100 PSI For use in your hot air furnace plenum. Other sizes available. ***Not recommended for air compressors*** This listing does not include the install kit. Information about our heat exchangersThis heat exchanger is ideal for a 24 x 25 plenum or larger. The outlets come out on the 24 side (shown as the vertical side in the picture above) The fin area is 24 x 24 There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer.All exchangers are 3 1/2 thick.Aluminum fins are installed at 12 fines per inch.All exchangers are triple pass design.Tubing is 1/4 copper.All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite's.Exchangers from us come with a lifetime warranty, including shipping. Exchangers will work with chilled water also.We stock many sizes, always order the largest size that will fit into your plenum.Any questions or concerns call us at 800-571-7002 See our other listings if you wish to purchase the install kit.Installation brackets for installing water to air heat exchangers inside of furnace plenums. This easy to install kit takes all of the work out of installing a coil. Great for the do it you...

Manufacturer: Unbranded Brand: Badgerpipe

This Circulator pump incorporates a cast iron housing, is a single speed motor.These pumps are among the most popular and most versatile Circulator pump models on the market. The Pump's performance parameters cover nearly all traditional heating applications - from radiant and baseboards, to fan coils and zoning and many others. Features:Built-in motor protection for longer life and better performance.Suitable for a wide range of applications, including radiant heating, hydronic heating, fan coil heating,Meant for Solar and other system types.Whisper-quiet operation for sound sensitive installations.Includes (2) Gaskets (O-rings).UL/CSA listed.Applications:Closed loop radiant heating & snow melting systems.Baseboard/Radiator/Fan coil heating and other hydronic heating applications.Exported By ExportYourStore

Manufacturer: Danby Brand: Danby Model: DWC350BLPA Color: Black/Stainless Steel/Glass

The Danby DWC350BLPA 3.2 Cu. Ft. 35-Bottle Free Standing Wine Cooler is an economical and convenient way to cool and store wine. This model offers a generous 35 bottle capacity and includes interior display light to show off your collection. It features 5 slide-out shelves and 1 staggered shelf. Plus you get an enhanced view of the interior through the shatter-resistant tempered glass door. The door is reversible and comes with a stylish platinum trim to complement the all black cabinet. Package Content: wine coolermanual / warranty

Manufacturer: Unbranded Brand: Badgerpipe

30x30/360,000 BTUs / 100 PSI For use in your hot air furnace plenum. Other sizes available. ***Not recommended for air compressors***This listing does not include the install kit. Information about our heat exchangersThis heat exchanger is ideal for a 30 x 31 plenum or larger. The outlets come out on the 30 side (shown as the vertical side in the picture above)The fin area is 30 x 30 There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer.All exchangers are 3 1/2 thick.Aluminum fins are installed at 12 fines per inch.All exchangers are triple pass design.Tubing is 1/4 copper.All our exchangers include the flat front face mounting for easier installation and increased plenum strength. This exchanger has 1 1/4 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite's.Exchangers from us come with a lifetime warranty, including shipping. Exchangers will work with chilled water also.We stock many sizes, always order the largest size that will fit into your plenum.Any questions or concerns call us at 800-571-7002 See our other listings if you wish to purchase the install kit.Installation brackets for installing water to air heat exchangers inside of furnace plenums. This easy to install kit takes all of the work out of installing a coil. Great for the do it you...

Manufacturer: HDW Supply Brand: HDW Supply

Liberty Foundry Franklin collection G-seriesBasket style keeps logs where they belong so fire burns neatly, safely and more efficientlyMade of heavy-duty iron constructionUse in small fireplaces or Franklin style stovesDesign allows air to reach logs from all angles12" back width x 12" depth by 4" height

Manufacturer: Unbranded Brand: Badgerpipe Color: Gray

100,000 BTUs / 100 PSI Hanging unit heater for garages, warehouses, greenhouses, ect. Hangs from ceiling and uses hot water to heat your dwelling. Other Sizes available,Units plug directly into a wall outlet, and comes with Thermostat! BP-100 Dimensions: Width = 19 0.75" Height = 16"Outlet Port: 1 Depth = 14" including fan Weight = 34 lbs - Shipping Weight = 43 lbs. CFM= 1,000 These are special in the fact they can be mounted either the typical way with threaded rods though the unit or mounted to bolt holes on the sides of the units. These units can be mounted in any direction and are complete with adjustable front louvers. All units have 1 inch copper inlet and outlets for high flow. These units are also made so that in the event that you ever need to change the exchanger it is easy to do and uses the same exchangers we sell for plenums in our other listings. We provide a 3 year warranty against manufacturer's defects and corrosion. Any questions feel free to email us or call us at 888-591-0943 All hanging heaters come packed in foam to prevent damage during shipping. We are a well established US company with many years of experience selling parts and supplies to the solar and outdoor wood furnace industries. Feel free to contact us with any questions you may have about hydronic heating or cooling parts and supplies whether you bought them from us or not.***We will ship to Ala...

Manufacturer: Cuisinart Brand: Cuisinart Model: CRTCUICWC1600FRB

A well-kept wine is a happy wine! The Cuisinart Private Reserve Wine Cellar ensures up to sixteen bottles of wine are kept at the ideal temperature while maintaining their signature bouquet, flavor and body. Use the touchpad to electronically set your preferred temperature (between 39 degrees - 68 degrees F). The thermoelectric cooling system holds the temp, quietly and efficiently, while the attractive stainless finish ensures wine collections are displayed in style. Features 16 Bottle Wine Cellar Thermoelectric Cooling System- reduces noise and vibration Electronic temperature control with blue LED display Low energy consumption Soft interior lighting with on/off control 4 chrome contoured wine racks designed to hold 750ml or 1500ml bottles Double-pane tinted viewing window Adjustable Feet