Wine Cellar Cooling Systems

Manufacturer: Vinotemp Brand: Vinotemp Color: black

Keep six of your favorite wines perfectly chilled and protected with the Vinotemp 6-Bottle Wall-Mount Thermoelectric Wine Cooler. Sleek wall mount design lets you keep bottles at hand without the unit taking up counter or floor space. It's attractive too, with its clear glass door and soft interior illumination. The eco-friendly thermoelectric cooling unit is whisper quiet, controlled by an easy-to-use touch-screen temperature control with digital display. Wine cooling was never so cool.

Manufacturer: Unbranded Brand: Badgerpipe

This listing is for TWO rolls of 300' of 3/4 NSF Certified Non Oxygen Barrier PEX Tubing.NSF Certified PEX tubing is made to the following specifications. Made to ASTM specifications. Rated at 100 psi at 180 degrees. Rated at 80 psi at 200 degrees. Rated at 160 psi at 73 degrees. Made using the silane method (water bath). PEX Size Inside Diameter Outside Diameter Volume Gal/100 ft 3/8" .360 .500 .50 1/2" .485 .625 .92 3/4 .681 .875 1.83 1" .875 1.125 3.03 NSF Certified Pex tubing is connected in 2 different ways. Crimp fittings are the most effective way of connecting. This is done with a barbed fitting and a copper crimp ring. The ring is compressed with the use of a crimp ring tool. This method is the cheapest and best way to a connection and is the least susceptible to leaks down the road. You can also use push-fit fittings. They are great for a quick repair, or a small installation project. They are however more expensive and more susceptible to leaks down the road. Do Not use pex tubing for any of the following applications. Anywhere the temperature could reach 230 F or more.Not for use with steam.Keep out of direct sunlight.Keep away from areas that are exposed to a flame or heat source.Not to be used with liquids -40 F or belowAny questions feel free to call us at 888-591-0943 or if you choose to pay with credit card or v-check you can call us at the same number. ***We will ship to Alaska/Hawaii...please call for shipping quote*** Shipping of larger items are freight truck. Smaller items are shipped UPS or Speedee. If your purchase is for insulated pipe, be sure we receive a phone number for the freight company. If item is shipped freight though not absolutely required, it is best if shipped to a commercial address.Exported By ExportYourStore

Manufacturer: NewAir. Brand: NewAir Model: LUMA036

With the NewAir AW-121E 12 Bottle Thermoelectric Wine Cooler, you can store your wine in style. This black unit's attractive stainless steel framed glass door and interior LED light system make it the perfect addition to a kitchen, home bar, office, or wine cellar. It's equipped with a digital thermostat and thermoelectric cooling system, so you can easily adjust the temperature of this 12-bottle unit.

Manufacturer: Unbranded Brand: Badgerpipe

1 Pex crimp tool finally at an affordable price. Comes with adjustment wrench. For use with copper crimp rings. Comes with User's Instruction Manual.This is by far the best and easiest way to assure that you have a proper seal on pex tubing. Free shipping. We have over 100 of this item in stock and will always ship your order the same business day we receive the order if placed before 2PM Central time.Any questions feel free to call us at 888-591-0943 .Exported By ExportYourStore

Manufacturer: Unbranded Brand: Badgerpipe

36x36 / 518,400 BTUs / 100 PSI For use in your hot air furnace plenum.Other sizes available. ***Not recommended for air compressors*** This listing does not include the install kit. Information about our heat exchangersThis heat exchanger is ideal for a 36 x 37 plenum or larger. The outlets come out on the 36 side (shown as the vertical side in the picture above)The fin area is 36 x 36 There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer.All exchangers are 3 1/2 thick.Aluminum fins are installed at 12 fines per inch.All exchangers are triple pass design.Tubing is 1/4 copper.All our exchangers include the flat front face mounting for easier installation and increased plenum strength. This exchanger has 1 1/4 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite's.Exchangers from us come with a lifetime warranty, including shipping. Exchangers will work with chilled water also.We stock many sizes, always order the largest size that will fit into your plenum.Any questions or concerns call us at 800-571-7002 See our other listings if you wish to purchase the install kit.Installation brackets for installing water to air heat exchangers inside of furnace plenums. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installerThis kit will work with most coils being sold on Ebay that are 3.5 wide. Check before you buy, but that will cover over 90% of the ones being sold. Even most that are listed as 4 are actually 3.5 . These will work with every heat exchanger we sell in our Ebay store. We provide a lifetime warranty against manufacturer's defects and corrosion. Any questions feel free to email us or call us at 888-591-0943 Dealer inquiries welcomed.These heat exchangers can also be used as a stand alExported By ExportYourStore

Manufacturer: Unbranded Brand: Badgerpipe

22X22 / 193,600 BTUs / 100 PSI For use in your hot air furnace plenum. Other sizes available. ***Not recommended for air compressors***This listing does not include the install kit. Information about our heat exchangersThis heat exchanger is ideal for a 22 x 23 plenum or larger. The outlets come out on the 22 side (shown as the vertical side in the picture above) The fin area is 22 x 22 There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer.All exchangers are 3 1/2 thick.Aluminum fins are installed at 12 fines per inch.All exchangers are triple pass design.Tubing is 1/4 copper.All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite's.Exchangers from us come with a lifetime warranty, including shipping. Exchangers will work with chilled water also.We stock many sizes, always order the largest size that will fit into your plenum.Any questions or concerns call us at 800-571-7002 See our other listings if you wish to purchase the install kit.Installation brackets for installing water to air heat exchangers inside of furnace plenums. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installerThis kit will work with most coils being sold on Ebay that are 3.5 wide. Check before you buy, but that will cover over 90% of the ones being sold. Even most that are listed as 4 are actually 3.5 . These will work with every heat exchanger we sell in our Ebay store. We provide a lifetime warranty against manufacturer's defects and corrosion. Any questions feel free to email us or call us at 888-591-0943 Dealer inquiries welcomed.These heat exchangers can also be used as a stand alone heat sourExported By ExportYourStore

Manufacturer: Kalorik Brand: Kalorik Model: WCL 20629

This sleek Kalorik wine cooler stores up to 18 bottles of your best wine.This appliance stores your wine under optimum conditions. Caloric wine cooler rack can hold 18 bottleswith two upper shelves subjected for white wine and the lower four for the red wine. Wine cooler glass door is tintedwith apremium metallic silver finish. The dual zone built in has a capacity 6 bottle of white wine and 12 bottle red wine managed in six shelves.The thermoelectric system of the product does not have compressor and the only moving part is the fan.Wine cooler humidity is managed with circulation of inner air. A digitally controlled temperature with LCD display is in this wine cooler kitchen aid. The floor standing cooler has no vibrations so the bottle sediments are not disturbed. The wine cooler rack has insulated dual temperature zone with scalloped shelves to cradle and display your wine. The wine cooler is energy efficient with its soft interior light and an on/off button.The dual zone built in has a capacity 6 bottle of white wine and 12 bottle red wine managed in six rows.This machine is completely Eco- friendly and uses no freon, which can be harmful to the planet, and it is so energy efficient it only uses about as much energy as a 75-watt light bulb.

Manufacturer: WhisperKOOL Brand: WhisperKOOL® Color: [u'Gray']

This ducting kit is designed to relocate unwanted heat form the exhaust of the SC Series. WhisperKOOL Hot Side Ducting Kit 2000i/3000i/4000i (P/N Ducting Kit for 2000i/3000i/4000i). This duct plenum is designed for hot side ducing, and is compatible with the following WhisperKOOL units:2000i3000i4000iKit includes:Duct Plenum Transition with integrated heat sensor8" In-line fan8" Adjustable elbow

Manufacturer: Unbranded Brand: Badgerpipe

19x20/152,000 BTUs / 100 PSI For use in your hot air furnace plenum. Other sizes available. ***Not recommended for air compressors*** This listing does not include the install kit. Information about our heat exchangersThis heat exchanger is ideal for a 19 x 21 plenum or larger. The outlets come out on the 19 side (shown as the vertical side in the picture above) The fin area is 19 x 20 There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer.All exchangers are 3 1/2 thick.Aluminum fins are installed at 12 fines per inch.All exchangers are triple pass design.Tubing is 1/4 copper.All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite's.Exchangers from us come with a lifetime warranty, including shipping. Exchangers will work with chilled water also.We stock many sizes, always order the largest size that will fit into your plenum.Any questions or concerns call us at 800-571-7002 See our other listings if you wish to purchase the install kit.Installation brackets for installing water to air heat exchangers inside of furnace plenums. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installerThis kit will work with most coils being sold on Ebay that are 3.5 wide. Check before you buy, but that will cover over 90% of the ones being sold. Even most that are listed as 4 are actually 3.5 . These will work with every heat exchanger we sell in our Ebay store. We provide a lifetime warranty against manufacturer's defects and corrosion. Any questions feel free to email us or call us at 888-591-0943 Dealer inquiries welcomed.These heat exchangers can also be used as a stand alone heat sourceExported By ExportYourStore

Manufacturer: Unbranded Brand: Badgerpipe

Our Private Labeled 3 speed pumps are an excellent product at a Great Price!!! The 34 GPM Badger Circulating Pump With Cord offers: * Removable Check Valve * Rotor Bleed Screw * 3 Speed ( Low, Med, High ) * Ceramic Shaft * 2 year warranty *Flow range: 0-34 U. S. GPM *Head range: 0-30Feet * 1 Cast Flange Kit Gallons/MinuteLow:20-24Medium:24-28High:30-34 These pumps are UL listed. Approved for North American installations. Operation Conditions * Ambient temperature: Max. 104°F (40 ) * Liquid temperature: 36°F (2 ) ~ 230°F (110 ) * System pressure: Max. 145 psi. Installation * The main parts of the pump include: pump body, impeller, stator, rotor, shielded sets, and vent plug. * The pump does not use mechanical seal stator and rotor are sealed with stainless steel. The overall pump structure is sealed with two heat-resistant rubber gaskets to avoid leakage. * The pump bearing is lubricated and cooled by the pumped water. ** Pump shaft must be installed horizontally.* Interchanges with Grundfos 26-96, Taco 011, Wilo Star 30, Wasser GPD10 and others. If you have any questions please call 888-591-0943. If you choose to pay by credit card or v-check you can call that number as well. Buy from a US manufacturer.Shipping of larger items are freight truck. Smaller items are shipped UPS or Speedee. If your purchase is for insulated pipe, be sure we receive a phone number for the freight company. If item is shipped freight though not absolutely required, it is best if shipped to a commercial address.Exported By ExportYourStore