Wine Cellar Cooling Systems - Page 4

Manufacturer: Danby Brand: Danby Model: DWC350BLPA Color: Black/Stainless Steel/Glass

The Danby DWC350BLPA 3.2 Cu. Ft. 35-Bottle Free Standing Wine Cooler is an economical and convenient way to cool and store wine. This model offers a generous 35 bottle capacity and includes interior display light to show off your collection. It features 5 slide-out shelves and 1 staggered shelf. Plus you get an enhanced view of the interior through the shatter-resistant tempered glass door. The door is reversible and comes with a stylish platinum trim to complement the all black cabinet. Package Content: wine coolermanual / warranty

Manufacturer: Unbranded Brand: Badgerpipe

30x30/360,000 BTUs / 100 PSI For use in your hot air furnace plenum. Other sizes available. ***Not recommended for air compressors***This listing does not include the install kit. Information about our heat exchangersThis heat exchanger is ideal for a 30 x 31 plenum or larger. The outlets come out on the 30 side (shown as the vertical side in the picture above)The fin area is 30 x 30 There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer.All exchangers are 3 1/2 thick.Aluminum fins are installed at 12 fines per inch.All exchangers are triple pass design.Tubing is 1/4 copper.All our exchangers include the flat front face mounting for easier installation and increased plenum strength. This exchanger has 1 1/4 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite's.Exchangers from us come with a lifetime warranty, including shipping. Exchangers will work with chilled water also.We stock many sizes, always order the largest size that will fit into your plenum.Any questions or concerns call us at 800-571-7002 See our other listings if you wish to purchase the install kit.Installation brackets for installing water to air heat exchangers inside of furnace plenums. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installerThis kit will work with most coils being sold on Ebay that are 3.5 wide. Check before you buy, but that will cover over 90% of the ones being sold. Even most that are listed as 4 are actually 3.5 . These will work with every heat exchanger we sell in our Ebay store. We provide a lifetime warranty against manufacturer's defects and corrosion. Any questions feel free to email us or call us at 888-591-0943 Dealer inquiries welcomed.These heat exchangers can also be used as a stand alone heat Exported By ExportYourStore

Manufacturer: HDW Supply Brand: HDW Supply

Liberty Foundry Franklin collection G-seriesBasket style keeps logs where they belong so fire burns neatly, safely and more efficientlyMade of heavy-duty iron constructionUse in small fireplaces or Franklin style stovesDesign allows air to reach logs from all angles12" back width x 12" depth by 4" height

Manufacturer: Unbranded Brand: Badgerpipe Color: Gray

100,000 BTUs / 100 PSI Hanging unit heater for garages, warehouses, greenhouses, ect. Hangs from ceiling and uses hot water to heat your dwelling. Other Sizes available,Units plug directly into a wall outlet, and comes with Thermostat! BP-100 Dimensions: Width = 19 0.75" Height = 16"Outlet Port: 1 Depth = 14" including fan Weight = 34 lbs - Shipping Weight = 43 lbs. CFM= 1,000 These are special in the fact they can be mounted either the typical way with threaded rods though the unit or mounted to bolt holes on the sides of the units. These units can be mounted in any direction and are complete with adjustable front louvers. All units have 1 inch copper inlet and outlets for high flow. These units are also made so that in the event that you ever need to change the exchanger it is easy to do and uses the same exchangers we sell for plenums in our other listings. We provide a 3 year warranty against manufacturer's defects and corrosion. Any questions feel free to email us or call us at 888-591-0943 All hanging heaters come packed in foam to prevent damage during shipping. We are a well established US company with many years of experience selling parts and supplies to the solar and outdoor wood furnace industries. Feel free to contact us with any questions you may have about hydronic heating or cooling parts and supplies whether you bought them from us or not.***We will ship to Alaska/Hawaii...please call for shipping quote*** Shipping of larger items are freight truck. Smaller items are shipped UPS or Speedee. If your purchase is for insulated pipe, be sure we receive a phone number for the freight company. If item is shipped freight though not absolutely required, it is best if shipped to a commercial address.Exported By ExportYourStore

Manufacturer: Cuisinart Brand: Cuisinart Model: CRTCUICWC1600FRB

A well-kept wine is a happy wine! The Cuisinart Private Reserve Wine Cellar ensures up to sixteen bottles of wine are kept at the ideal temperature while maintaining their signature bouquet, flavor and body. Use the touchpad to electronically set your preferred temperature (between 39 degrees - 68 degrees F). The thermoelectric cooling system holds the temp, quietly and efficiently, while the attractive stainless finish ensures wine collections are displayed in style. Features 16 Bottle Wine Cellar Thermoelectric Cooling System- reduces noise and vibration Electronic temperature control with blue LED display Low energy consumption Soft interior lighting with on/off control 4 chrome contoured wine racks designed to hold 750ml or 1500ml bottles Double-pane tinted viewing window Adjustable Feet

Manufacturer: Unbranded Brand: Badgerpipe

200,000 BTUs / 100 PSI Hanging unit heater for garages, warehouses, greenhouses, ect. Hangs from ceiling and uses hot water to heat your dwelling. Other sizes available. Units plug directly into a wall outlet, and comes with Thermostat! BP-200Dimensions: Width = 27 0.75" Height = 24" Depth = 16" including fanOutlet Port: 1 Weight = 64 lbs - Shipping Weight = 92 on pallet CFM= 2840 These are special in the fact they can be mounted either the typical way with threaded rods though the unit or mounted to bolt holes on the sides of the units. These units can be mounted in any direction and are complete with adjustable front louvers. All units have 1 inch copper inlet and outlets for high flow. These units are also made so that in the event that you ever need to change the exchanger it is easy to do and uses the same exchangers we sell for plenums in our other listings. We provide a 3 year warranty against manufacturer's defects and corrosion. Any questions feel free to email us or call us at 888-591-0943 All hanging heaters come packed in foam to prevent damage during shipping. We are a well established US company with many years of expierence selling parts and supplies to the solar and outdoor wood furnace industries. Feel free to contact us with any questions you may have about hydronic heating or cooling parts and supplies whether you bought them from us or not.***We will ship to Alaska/Hawaii...please call for shipping quote*** Shipping of larger items are freight truck. Smaller items are shipped UPS or Speedee. If your purchase is for insulated pipe, be sure we receive a phone number for the freight company. If item is shipped freight though not absolutely required, it is best if shipped to a commercial address.Exported By ExportYourStore

Manufacturer: Unbranded Brand: Badgerpipe

8 x 8/ 25,600 BTUs / 100 PSI For use in your hot air furnace plenum. Other sizes available ***Not recommended for air compressor use***This listing does not include the install kit. Information about our heat exchangersThis heat exchanger is ideal for a 8 x 9 plenum or larger. The outlets come out on the 8 side (shown as the vertical side in the picture above) The fin area is 8 x 8 There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer.All exchangers are 3 1/2 thick.Aluminum fins are installed at 12 fines per inch.All exchangers are triple pass design.Tubing is 1/4 copper.All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite's.Exchangers from us come with a lifetime warranty, including shipping. Exchangers will work with chilled water also.We stock many sizes, always order the largest size that will fit into your plenum.Any questions or concerns call us at 800-571-7002See our other listings if you wish to purchase the install kit. Installation brackets for installing water to air heat exchangers inside of furnace plenums. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installer This kit will work with most coils being sold on Ebay that are 3.5 wide. Check before you buy, but that will cover over 90% of the ones being sold. Even most that are listed as 4 are actually 3.5 . These will work with every heat exchanger we sell in our Ebay store. We provide a lifetime warranty against manufacturer's defects and corrosion. Any questions feel free to email us or call us at 888-591-0943 Dealer inquiries welcomed. These heat exExported By ExportYourStore

Manufacturer: Unbranded Brand: Badgerpipe

Stainless steel Clamps for 1 1/2 Pex This is for a bag of 10 of these. They do not require any special tools. We have over 1000's of these parts in stock and always ship your order the same business day we receive the order if placed before 2PM Central time. Any questions feel free to call us at 888-591-0943 Pipe Clamps These stainless steel pipe clamps are for 1 1/2 pex fittings. No special crimp tool required. These clamps are 100% stainless steel including the band and bolt! Great for the self-installer. Just uses an Allen wrench to adjust and tighten.Exported By ExportYourStore

Manufacturer: SPT Brand: SPT Model: WC-2461H Color: Black

Easily chill two dozen bottles of wine with this dual-zone thermo-electric wine cooler. The large LED display and simple digital controls let you effortlessly set the temperature, while the thermo-electric cooling and heating system automatically maintains the desired conditions. The appliance's compact size and sleek design make it an ideal piece for basement bars, kitchens and man caves. Capacity:24 bottles Motor: 140 watt Temperature range: 45 to 64 degrees F ThermoElectric cooling and heating system maintains internal temperature setting Dual-zone offers two independent temperatures settings LED temperature display with touch-sensitive controls Environment friendly (refrigerant free) Quiet operation No vibration (bottle sediment is not disturbed) Ten (10) slide-out shelves Double pane insulated glass door Specs Assembly Assembly Required Bottle Count 24 Color Black Lighting Type LED Wattage 100-200 Watts Dimensions See Details Warranty 1 year Limited Manufacturer Model Number WC-2461H Country of Origin China Assemely of door handles required

Manufacturer: Kucht Brand: Kucht Model: K150D Color: stainless-steel

This Kucht K150D - 48 Bottles Wine Cooler is the best choice for new collector or the seasoned connoisseurThis dual zone wine cooler will store up to 48 bottles in optimum temperature humidity light and vibration preserving the taste and texture of t...